Soaker Hose | Soaker Hose Rings - Getting Around Your Crop Irrigation Needs

Multiple Hoses

Connecting and Running Multiple Hoses

Where multiple Soaker Hoses are required, there are two options available to maintain a balanced water pressure.

Option 1 is to use a Ball Valve Tap at each junction where standard hose pipe meets the soaker hose. These taps can be opened to varying degrees between the first junction (strongest pressure) tap slightly open and the last junction (weakest pressure) tap fully open.

Option 2 is to have the main standard garden hose connected on a complete loop from and back to the main water supply tap. Various Soaker Hoses can be attached along the length of the standard hose and equal

home page
company profile
product information
green issues
soaker rings
essential contacts
purchase soakerhose

water pressure should be maintained along all lengths with normal use.

trade enquiries & registration | privacy policy | terms & conditions

Pressure Fed or Fast Leak

Soaker Hose from Aquarius Manufacturing Ltd is now available in Regular pressure fed for use from a tap and Fast Leak for use with Tanks and Water Butts. It is recommended that the water containers are placed at a height of between two and four feet off the ground dependent upon how much pressure is required. For a slower flow, place the tank nearer to the ground. The higher the tank, the greater the pressure of water going into the Soaker Hose but also remember higher the tank, more water will be used faster. Unroll Soaker Hose 24 hours prior to use as this will allow the micro-perforations to open up slightly after being tightly coiled.